jaga flash news

Tuesday 3 December 2013

How to Configure BSNL broadband WiFi Modem to Enable WiFi

How to Configure BSNL broadband WiFi Modem to Enable WiFi



How to Configure BSNL broadband WiFi Modem to Enable WiFi



Step 1: Click on Start Button, Select Control Panel, Choose Network Connection to check your current settings for Internet.

Step 2: Now double click on the Local Area Connection and Click on Properties Tab in the dialogue box.

Step 3: In properties, choose general tab and scroll down to Internet Protocol (TCP/IP) menu and select it, click on

properties button below and you will see a new dialogue box with title Internet Protocol Properties.

Step 4: Make sure that general tab is displayed in the new dialogue box; Click on the Use the Following IP Address radio

button. Enter following IP Addresses in the given forms:

IP Address: 192.168.1.3 (Please avoid 192.168.1.1 or .2 or any number after .35)

Subnet Mask: 255.255.255.0 (Is filled automatically indeed)

Default Gateway: 192.168.1.1 (This is default IP Address for BSNL)

This step was mentioned so that you can access your Modem/Router by entering 192.168.1.1 in your browsers address bar.

However you can also use the following DNS Server address in order to increase your BSNL Broadband’s speed.

Preferred DNS Server Address: 218.248.220.46

Secondary DNS Server Address: 218.248.220.69

Step 5: Copy and Paste or Click on 192.168.1.1 to access your modem or routers basic configuration.

Step 6: Use following username and password so that you can enter inside the Graphic Interface of ADSL Modem. Username:

admin Password: admin

Step 7: Click on the Advanced Setup after the User Interface loads fully; click on the Edit button over PPPoE Service.

Step 8: Do not change the ATM PVC Configuration, click on the next button to proceed.

Step 9: Change the connection type so that you can choose PPP over Ethernet and click on the next button.

Step 10: Enter your Broadband Username and Password; enter the service name as you wish (Dataone or BSNL will be good).

Hint: Broadband username usually contains your BSNL phone number while password is password only.

Step 11: Now you don’t have to change anything in the modem/router configuration, please press next or save whatever button

is there.

How to Secure your WiFi connection with Password:

Step 12: Goto Wireless tab on the left side and click on it.

Step 13: Choose Security option and set network authentication to Open; Enable WEP encryption and current network key to 1

(can be anything); Fill network key 1 as a strong password for your WiFi Lan.

Step 14: Save your setting and reboot the modem/router so that all the settings can become effective.

1 comment: